11 4 490 Removal And Installation Kit

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For removing and installing piston pin circlips.

Engine: M57T2, N43, N45T, N46T, N51, N52, N52K, N53, N54, N62TU

SI number: 1 17 04 (130)

Order number: 11 4 490 Removal and installation kit

Fig 1: Identifying Kit (11 4 490)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 11 4 491 Mounting holder

2 = 11 4 492 Removal pliers

3 = 11 4 493 Mounting pliers

4 = 11 4 494 Drift