13 11 Carburetor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
CARBURETOR TIGHTENING SPECIFICATION
| Type | thread | tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Carburetor to intake manifold | M10 / M20 / M30 | 10 Nm | ||
| 2AZ Carburetor to insulating flange | M10 / M20 / M30 | 10 Nm | ||
| 3AZ Insulating flange to intake manifold | M10 / M20 / M30 | 10 Nm | ||
| 4AZ Idling shut off valve; max. | M10 / M20 / M30 | 5 Nm | ||
| 5AZ Flow valve; max. | M10 / M20 / M30 | 28 Nm | ||
| 6AZ Throttle valve assembly to float housing; max. | M10 / M20 / M30 | 9 Nm | ||
| 8AZ Throttle valve control to carburetor; max. | 2BE | 3 Nm | ||
| 9AZ Warm-up regulator to engine | M10 / M20 / M30 | 23 Nm |