11 51 Water Pump And Drive
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
WATER PUMP TIGHTENING SPECIFICATION
| |
Type |
Thread |
Description |
Tightening Specification |
| 1AZ Water pump to crankcase |
N51 |
M8x32 |
Replace screws
Thread repairs exclusively with Al Heli-coil.
Jointing torque and angle of rotation must be observed without fail. |
|
| |
|
|
Jointing torque |
10 Nm |
| |
|
|
Torque angle |
90 ° |