11 13 Oil Pan
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
OIL PAN TIGHTENING SPECIFICATION
| Type | Thread | Description | Tightening Specification | |
|---|---|---|---|---|
| 1AZ Oil drain plug | N51 | M12 x 1.5 | 25 Nm | |
| 2AZ Oil pan on engine block Aluminum oil sump Aluminum screws/bolts are marked with blue paint. |
N51 | M8x26 | Replace screws Thread repairs exclusively with Al Heli-coil Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 60 ° | |||
| 3AZ Oil pan on engine block Aluminum oil sump Aluminum screws/bolts are marked with blue paint. |
N51 | M8x92 M8x112 |
Replace screws Thread repairs exclusively with Al Heli-coil Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 180 ° | |||
| 5AZ Oil deflector to crankcase lower section Aluminum screws/bolts are marked with blue paint. |
N51 | M6x20 | Replace screws Thread repairs exclusively with Al Heli-coil Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 4 Nm | |||
| Torque angle | 90 ° | |||
| 6AZ Oil pan on engine block Sheet metal oil sump Aluminum screws/bolts are marked with blue paint. |
N51 | M8x24 | Replace screws Thread repairs exclusively with Al Heli-coil Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 90 ° | |||
| 7AZ Oil pan on engine block Aluminum oil sump Aluminum screws/bolts are marked with blue paint. (AWD) |
N51 | M8x36 M8x44 |
Replace screws Thread repairs exclusively with Al Heli-coil Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 90 ° | |||