65 81 060 Removing and installing/replacing outside temperature sensor
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove Front Bumper Trim
- E90, E91, E92, E93 only:
Partially remove Cooling Air Duct At Top left
Disconnect plug connection (1).
Snap out outside temperature sensor in direction of arrow and remove.
Installation:
Outside temperature sensor must audibly snap into place.
Check for secure seating after fitting.