65 75 071 Removing and installing (replacing) module for interior movement detector (coupe)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with Notes On Protection Against Electrostatic Damage (ESD Protection)
.
Necessary preliminary tasks:
Open retaining hooks (1) and feed module for passenger compartment sensor (2) in direction of arrow out of trim (3) and remove.
Installation:
Retaining hooks (1) must not be damaged.
Replacement:
Carry out PROGRAMMING/ENCODING