65 77 770 Removing and installing (replacing) rollover controller

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Important! Read and comply with notes on protection against electrostatic damage (ESD protection).

Necessary preliminary tasks: Remove panel for passenger compartment partition .

Release expansion rivets (1). Fold back insulating mat (2).

Fig 1: Release Expansion Rivets And Fold Back Insulating Mat

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1). Release screws (2). Remove rollover controller.

Fig 2: Disconnect Plug Connection (1), Release Screws (2) And Remove Rollover Controller

Courtesy of BMW OF NORTH AMERICA, INC.

Function check with BMW diagnosis system: Trigger/retract rollover protection system.