65 77 541 Removing and installing/replacing front left or right acceleration sensor
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Acceleration sensor only fitted in US version!
Necessary preliminary tasks:
- Remove front Wheel Arch Trim
Disconnect plug connection (1).
Release screws (2) and remove sensor (3).
Installation:
Replace screws.
For tightening torque refer to 65 77 9AZ in 65 77 AIRBAG TRIGGERING CONTROL .