32 13 650 Removing and installing/replacing EH converter for Servotronic
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Adhere to the utmost cleanliness. Do not allow any dirt to enter the hydraulic system.
Disconnect plug connection (1).
Release screws (2).
Remove EH converter (3).
Installation:
Clean side return orifice with compressed air. Align EH converter (3) to opening in power steering gear, press by hand into power steering gear up to stop, insert screws (2) and tighten down.
Tightening torque: see 4AZ in 32 00 STEERING .
After installation:
- FILL AND BLEED hydraulic system