Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE exhaust system (only E60, E61, E63, E64)

Disconnect plug connection on oxygen control sensor (1).

Release lambda control sensor (1) on exhaust manifold of cylinder nos. 4 to 6 with special tool 11 4 260 .

Fig 1: Releasing Lambda Control Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

All:

Installation note:

Cable color of lambda control sensor, cylinders nos. 1 to 3 = black.

Cable color of lambda control sensor, cylinders nos. 4 to 6 = grey.

Tightening torque 11 78 1AZ .

Assemble engine.

Check function of DME.