LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1367 (Engine - Special Tools - N51 - E90) >> 11 Engine >> 11-9180 Tool >> Minimum set: Mechanical tools MW Tool >> SI number

SI number

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

01 01 01 (662)

Consisting of:

5 = 0496660 Ring

NOTE: For fitting rear radial shaft seal - rim offset 6.6 mm (N55).

1 = 0494028 Bush

2 = 0494029 Thrust piece

3 = 0494030 Nut

4 = 0494031 Screw

NOTE: (screws (2 x))
Fig 1: Identifying Tool (119180)
G04739152Courtesy of BMW OF NORTH AMERICA, INC.