64 5 100 Set for sealing adapters

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For closing off line flanges of A/C components (evaporator, condenser, compressor) for leak testing. Special tool 64 5 101 replaced by 64 5 105 (from 01/2005).

Series: E32, E34, E36, E38, E39, E46, E53, E60, E61, E63, E64, E70, E81, E83, E87, E90, E91, E92, E93

SI number: 1 17 98 (359)

Order number: 64 5 100

Set of sealing adapters

Consisting of:

1 = 64 5 104 Connecting hose

NOTE: For connecting pressure cylinder to filler adapter

2 = 64 5 102 Sealing adapter

NOTE: For closing off intake line

Fig 1: Special Tool (64 5 100)

Courtesy of BMW OF NORTH AMERICA, INC.

3 = 64 5 103 Sealing adapter

NOTE: For closing of intake connection on compressor

4 = 64 5 105 Filler adapter

NOTE: For closing off the pressure line and connection at connecting hose (replacement for special tool SWZ 64 5 101 since 01/2005)

5 = 64 5 106 Sealing adapter

NOTE: For closing off line during leak test (included in scope of delivery from 01/2005)

6 = 64 5 107 Sealing adapter

NOTE: For closing off line during leak test for E81, E87, E90, E91, E92, E93 (included in scope of delivery from 02/2007)

7 = 64 5 108 Sealing adapter

NOTE: For closing off line during evaporator leak test in E70 (included in scope of delivery from 02/2007)