LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1055 (General Electrical System - Repair - E92/93) >> Switches >> 61 31 037 Removing and installing/replacing light control unit

61 31 037 Removing and installing/replacing light control unit

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Necessary preliminary tasks: 

Lever out trim of light control unit (2) with special tool 00 9 317  at fastening points (1) and pull back in direction of arrow.

Unlock and disconnect associated plug connection, remove trim of light control unit (2).

Fig 1: Removing Trim Of Light Control Unit
G04727581Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Unlock catches (1) and unclip light control unit (2) from trim (3).

Fig 2: Uncliping Light Control Unit From Trim
G04727582Courtesy of BMW OF NORTH AMERICA, INC.