33 4 430 Set of tools

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: For removing and installing front rubber mounts on rear axle carrier.

Series: E81, E82, E87, E88, E90, E91, E92, E93

Storage location: B49, C49

SI number: 1 15 04 (117)

Order number: 33 4 430 Set of tools

Fig 1: Identifying 33 4 430 Set Of Tools

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 33 4 431 Pull-out disk

2 = 33 4 432 Counter support

3 = 33 4 433 Draw-in disk

4 = 33 4 434 Spindle 225 mm, M16

5 = 33 4 435 Pressure nut

6 = 33 4 436 Spindle 320 mm, M18

7 = 33 4 437 Pressure nut