33 4 160 Removal/installation thrust pieces

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 3 312, 33 3 314, 33 3 315

NOTE: For removing and installing rubber mount at front of rear axle differential (split rubber mount)

Series: E38, E39, E60, E61, E63, E64, E65, E66, E67, E81, E82, E87, E88, E90, E91, E92, E93, RR1

Storage location: B33

Fig 1: Identifying 33 4 160 Removal/Installation Thrust Pieces

Courtesy of BMW OF NORTH AMERICA, INC.

SI number: 1 06 94 (801)

Order number: 33 4 160 Removal/installation thrust pieces

Consisting of:

1 = 33 4 161 Support tube

NOTE: For removal

2 = 33 4 162 Support plate

NOTE: For removal

4 = 33 4 164 Thrust piece

NOTE: For installation

5 = 33 4 165 Guide tube

NOTE: For installation

6 = 33 4 166 Support plate

NOTE: For installation