33 4 030 Set of tools

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: For removing and installing rear wheel bearings

Series: E23, E24, E28, E32, E34, E36, E46, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93

Storage location: C7

Order number: 33 4 030 Set of tools

Fig 1: Identifying 33 4 030 Set Of Tools

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 33 4 031 Bell

NOTE: For gripping when removing rear wheel bearing

2 = 33 4 032 Spindle

NOTE: Model series: E28

3 = 33 4 033 Thrust washer

NOTE: For removing rear wheel bearing / Model series: E28 / model: 518, 528i

4 = 33 4 034 Guide sleeve

NOTE: For installing rear wheel bearing / Model series: E28 / model: 518, 520i

5 = 33 4 035 Thrust washer

NOTE: For installing rear wheel bearing / Model series: E28 / model: 518, 520i

6 = 33 4 036 Guide sleeve

NOTE: For installing rear wheel bearing / Model series: E28 / model: 525i, 528i

7 = 33 4 037 Thrust washer

NOTE: For installing rear wheel bearing / Model series: E28 / model: 525i, 528i

8 = 33 4 038 Nut with bearing

NOTE: Model series: E28