33 3 310 Removal/installation tool kit

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 4 181 (E46)

NOTE: For removing and installing rubber mounts in rear axle suspension, front and rear

E31, E36, E38, E46, E60, E61, E63, E64, E65, E66, E67, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, R53, RR1

Storage location: A7

Fig 1: Identifying 33 3 310 Removal/Installation Tool Kit

Courtesy of BMW OF NORTH AMERICA, INC.

SI number: 1 05 90 (207)

Order number: 33 3 310 Removal/installation tool kit

Consisting of:

1 = 33 3 311 Locator sleeve

NOTE: For removing and installing rubber mount / model series: E31, E36

2 = 33 3 312 Thrust piece

NOTE: For removing rubber mount at rear differential cover / model series: E31, E36, E38, E60, E61, E63, E64, E65, E66, E67, RR1

3 = 33 3 313 Thrust piece

NOTE: For installing rubber mount on rear differential cover - model series: E31, E36, E38 For removing rubber mount at rear differential cover - model series: E46

Thrust member

NOTE: For installing rear rubber mount in rear axle carrier / model series: E31

In conjunction with: 33 3 333 and 33 3 334