33 3 260 Set of tools

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: For removing and installing rear wheel bearings in wheel carrier and for fitting drive flange

Series: E31, E34, E38, E46/16, E52, E53, E60, E61, E67, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, RR1

Storage location: B7, B8

SI number: 1 05 90 (207)

Fig 1: Identifying 33 3 260 Set Of Tools

Courtesy of BMW OF NORTH AMERICA, INC.

Order number: 33 3 260 Set of tools

Consisting of:

2 = 33 3 262 Spacer sleeve

NOTE: For removing wheel bearing from wheel carrier and for installing drive flange Model series: E31, E34, E38, E46/16, E52, E53, E83

3 = 33 3 263 Adapter sleeve

NOTE: For removing wheel bearing from wheel carrier - Model series: E31, RR1

4 = 33 3 264 Adapter sleeve

NOTE: For installing wheel bearing in wheel carrier Model series: E31, E34, E38, E46/16, E52, E53, E83, RR1

5 = 33 3 265 Thrust washer

NOTE: For installing wheel bearing in wheel carrier - Model series: E31

6 = 33 3 266 Adapter sleeve

NOTE: For installing drive flange and removing wheel bearing Model series: E38, E52, E53, E60, E61, E83, RR1

7 = 33 3 267 Thrust washer

NOTE: For installing drive flange Model series: E31, E34, E38, E46/16, E52, E53

8 = 33 3 268 Support disk

NOTE: For installing wheel bearing Model series: E38, E52, E53, E60, E61, E83, RR1