33 2 100 Clamping fixture

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For gripping output shafts when press-fitting constant-velocity joint

Series: E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E36/7, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, F01, F02, RR1, RR2

Storage location: C23

Fig 1: Identifying 33 2 100 Clamping Fixture

Courtesy of BMW OF NORTH AMERICA, INC.

SI number: 1 06 94(801)

Order number: 33 2 100 Clamping fixture

Consisting of:

1 = 33 2 101 Frame

2 = 33 2 102 Insert shell (2 x)

NOTE: Diameter 30 mm - model series: E38 / model: 730i

3 = 33 2 103 Insert shell (2 x)

NOTE: Diameter 35 mm - model series: all, except E38