31 3 350 Spring Holder
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Minimum set: Mechanical tools
In conjunction with: 31 3 340 and 31 3 360
NOTE:
For locating coil springs during tensioning. No. 31 3 350 reserved for consecutive sub-number spring tensioner 31 3 340.
Series: E31, E36, E36/7, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E71, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, F01, F02, R50, R52, R53, R55, R56
Storage location: Single
SI number: 1 11 99 (438)
Order number: 31 3 350
Spring holder
Consisting of:
1 = 31 3 351 Spring holder (2 x)
NOTE:
To be used with repair instructions only
2 = 31 3 352 Spring holder (2 x)
NOTE:
To be used with repair instructions only
3 = 31 3 353 Spring holder (2 x)
NOTE:
To be used with repair instructions only
4 = 31 3 354 Spring holder ring
NOTE:
To be used with repair instructions only
5 = 31 3 355 Spring holder
NOTE:
To be used with repair instructions only
6 = 31 3 356 Centering ring
NOTE:
To be used with repair instructions only
7 = 31 3 357 Spring holder (2 x)
NOTE:
To be used with repair instructions only
In conjunction with: 31 3 340
8 = 31 3 358 Insertion ring
NOTE:
To be used with repair instructions only. For insertion in spring retainer ring 31 3 354. Model series: E87
9 = 31 3 381 Spring retaining ring
NOTE:
To be used with repair instructions only.
10= 31 3 382 Spring retainer
NOTE:
To be used with repair instructions only.
11= 31 3 383 Spring retainer
NOTE:
To be used with repair instructions only.