24 2 310 Tool Kit For Removing And Installing Reverse Gear Piston

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For disassembling and assembling transmission for "Sealing intermediate plate" job

Transmission: A4S 270R, A4S 310R

SI number: 1 22 97(239)

Order number: 24 2 310

Tool kit for removing and installing reverse gear piston

Fig 1: Identifying 24 2 310 Tool Kit For Removing And Installing Reverse Gear Piston

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 24 2 311 Pressure plate

NOTE: For removing and installing spring retainer
2 = 24 2 312 Spindle with pressure plate

NOTE: Spindle M14x1.5, nut M14, pressure plate and washer / For removing and installing spring retainer

3 = 24 2 313 Guide pin (2)

NOTE: For fixing gaskets and intermediate plates on intermediate housing

4 = 24 2 314 Slip bush

NOTE: For removing piston in cylinder of intermediate plate