24 2 140 Tensioning Tool

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For removing and installing snap ring in front of centering plate of ZF transmissions

Transmission: 3 HP 12, 3 HP 20, 3 HP 22

Order number: 24 2 140

Tensioning tool

Fig 1: Identifying 24 2 140 Tensioning Tool

Courtesy of BMW OF NORTH AMERICA, INC.