LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1036 (Automatic Transmission - Special Tools) >> Automatic Transmission >> 24 0 020 Oil Pressure Test Accessories

24 0 020 Oil Pressure Test Accessories

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools 

In conjunction with: 13 3 061 and BMW DIS

NOTE: For pressure gauge 13 3 061 or BMW DIS for checking oil pressure

Transmission: 3 HP 12, 3 HP 20, 3 HP 22, 4 HP 22, 4 HP 24, A4S 270R, A4S 310R, A5S 300J, A5S 310Z, A5S 440Z, A5S 560Z

Fig 1: Identifying 24 0 020 Oil Pressure Test Accessories
G04739310Courtesy of BMW OF NORTH AMERICA, INC.

Storage location: B23, B24, single

Order number: 24 0 020

Oil pressure test accessories

Consisting of:

1 = 24 0 021 Pressure hose with connection

NOTE: Pressure hose 1.7 m, connection M12x1.5 - M14x1.5 external thread/for checking the various converter pressures / Transmission: A4S 310R, A4S 270R

2 = 24 0 022 Reducer

NOTE: For checking main pressure (3 HP 22, A5S 310Z) and clutch A (ZF transmissions) / transmission: 3 HP 22, A5S 310Z, A5S 560Z and all ZF transmissions

In conjunction with: 24 0 140

3 = 24 0 023 Pipe bend, 145 mm

NOTE: Extended length 145 mm / Transmission: 4 HP 22, 4 HP 24

In conjunction with: 13 6 052

4 = 24 0 024 Pipe bend, 90 mm

NOTE: Extended length 90 mm In conjunction with: 13 6 052

5 = 24 0 025 Banjo bolt

NOTE: M20x1.5 - M18x1.5 / For checking converter pressure / Transmission: 3 HP 12

In conjunction with: 24 0 024

6 = 24 0 026 Reducer

NOTE: M24x1.5 - 20x1.5 / For checking main pressure / Transmission: 3 HP 20

In conjunction with: 24 0 024

7 = 24 0 027 Reducer

NOTE: M20x1.5 - M18x1.5 / For checking main pressure (3 HP 12) and converter pressure (3 HP 20) / Transmission: 3 HP 12, 3 HP 20

In conjunction with: 24 0 024

8 = 24 0 028 Screw plug

NOTE: M18x1.5 / For closing off oil supply lines while checking converter pressure / Transmission: 3 HP 20

9 = 24 0 029 Adapter

NOTE: For closing off supply and return lines while checking main pressure / Transmission: 3 HP 22