23 2 060 Rillex Ball Bearing Extractor 6306

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For removing deep groove ball bearing of input and output shaft

Transmission: 242/4, 262/4

Order number: 23 2 060

Rillex ball bearing extractor 6306

Consisting of:

1 = 23 2 061 Claw for Rillex 6306 (8)

2 = 23 2 062 Union sleeve

3 = 23 2 063 Pressure spindle

Fig 1: Identifying 23 2 060 Rillex Ball Bearing Extractor 6306

Courtesy of BMW OF NORTH AMERICA, INC.