23 2 020 Rillex Ball Bearing Extractor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: 7 balls - for removing deep groove ball bearing of transmission input shaft

Transmission: 245/5 Sport, 265/5 Sport

Order number: 23 2 020

Rillex ball bearing extractor

Consisting of:

1 = 23 2 021 Claw for Rillex (7)

2 = 23 2 022 Union sleeve

3 = 23 2 023 Pressure spindle

Fig 1: Identifying 23 2 020 Rillex Ball Bearing Extractor

Courtesy of BMW OF NORTH AMERICA, INC.