00 1 490 Assembly stand
WARNING: This page is about a different car, the 2010 BMW 128i, 2009 BMW 128i, and 2008 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For accommodating engine, transmission and rear axle, replaced by 00 1 450 (passenger car) Release for motorcycle only!
Order number: 00 1 490
Assembly stand
Consisting of:
1 = 00 1 491 Tube frame
NOTE:
Release for motorcycle only!
2 = 00 1 492 Mounting head without mounting flange
NOTE:
Release for motorcycle only!
3 = 00 1 493 Mounting flange (2 pcs. required)
NOTE:
Release for motorcycle only!
4 = 00 1 494 Retainer
NOTE:
Release for motorcycle only!
5 = 00 1 495 Lock for mounting flange
NOTE:
Release for motorcycle only!
6 = 00 1 496 Release lever
NOTE:
Release for motorcycle only!
7 = 00 1 497 Wheel without brake
NOTE:
Release for motorcycle only!
8 = 00 1 498 Wheel with brake
NOTE:
Release for motorcycle only!
9 = 00 1 499 Storage plate
NOTE:
Release for motorcycle only!