00 0 190 Cable cabinet I, complete

WARNING: This page is about a different car, the 2010 BMW 128i, 2009 BMW 128i, and 2008 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: With set of films and accessories - For storing adapter cables as well as measuring devices and testers

SI number: 0 02 99 (399)

Order number: 00 0 190

Cable cabinet I, complete

Consisting of:

1 = 00 0 191 Cable cabinet

Fig 1: Identifying 00 0 190 Cable Cabinet I, Complete

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Without contents or accessories Basis for cable cabinets I and II

2 = 00 0 192 Set of films I

NOTE: For identifying storage locations in cable cabinet I - valid status in each case

3 = 00 0 193 Cable holder set - H -

NOTE: For cable cabinet I only 24 guide rails each with 15 retaining straps for accommodating adapter leads

4 = 00 0 194 Cable carrier - B -

NOTE: For accommodating engine test leads For extending cable suspensions in cable cabinets I and II

6 = 00 0 195 Swivel board frame

NOTE: Carrier of cable suspensions in cable cabinets I and II

7 = 00 0 196 Drawer block

NOTE: For cable cabinet I only

8 = 00 0 197 Magnet with roller

NOTE: For improved location and spacing of swivel boards - For retrofitting in cable cabinets I and II only

9 = 00 0 198 Compartment floor

NOTE: For cable cabinet I only

10= 00 0 199 Index

NOTE: For finding BMW special tools for automotive electrics in cable cabinets I and II