63 21 Rear Light Unit
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
REAR LIGHT UNIT - TIGHTENING TORQUE SPECIFICATION TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Retaining nuts, rear light | E60/E61/E85/E86/E90/E91/E92/E93 | - | See LIGHTS - REPAIR INSTRUCTIONS | 2.5 Nm |
| - | E63/E64/E70/E71 | - | - | 2.5 Nm |
| - | E81/E82/E87/E88 | - | See LIGHTS - REPAIR INSTRUCTIONS | 2.8 Nm |
| - | E83 | - | See LIGHTS - REPAIR INSTRUCTIONS | 4.0 Nm ± 0.5 Nm |
| 2AZ Retaining screws, rear light | E63/E64 | - | - | 1.5 Nm |
| 3AZ Retaining clip (clamping claw), rear light | E92/E93 | - | - | 4.0 Nm |
| - | E70/E71 | - | - | 2.5 Nm |
| 4AZ Auxiliary brake light to carrier | E81/E87 | - | - | 2.3 Nm |
| 5AZ Additional brake light to rear spoiler | E83 | - | - | 2.5 Nm ± 0.5 Nm |