33 41 Wheel Bearings
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL BEARINGS - TIGHTENING TORQUE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Drive flange hub to output shaft | E81, E82, E87, E88, E90 / Except S65, E91, E92 / Except S65, E93 | M27 | Replacing collar nut, lightly oil contact face | 420 Nm |
| - | E84 / E90 / E92 / E93 / S65 | M27 | Replacing collar nut, lightly oil contact face | 300 Nm |
| - | E81 / E82 / E87 / E88 / E90 / E91 / E92 / E93 / S65 | M24 | Replacing collar nut, lightly oil contact face | 250 Nm |
| 2AZ Wheel bearing to wheel carrier | E84 | M10 | Replace screws Jointing torque | 30 Nm |
| Torque angle | 110 degrees | |||