33 52 Shock Absorbers
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
SHOCK ABSORBERS - TIGHTENING TORQUE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Shock absorber to thrust bearing | E81 / E82 / E84 / E87 / E88 / E90 / E91 / E92 / E93 | M10 | Replace support bearing upper section | 27 Nm |
| - | E90 / E92 / E93 / S65 | M14 | Replace nut | 37 Nm |
| 2AZ Shock absorber to rubber mount | E81 / E82 / E84 / E87 / E88 / E90 / E91 / E92 / E93 / S65 | M10 | Replace nut | 38 Nm |
| 3AZ Rubber mount, shock absorber, to camber arm | E81 / E82 / E84 / E87 / E88 / E90 / E91 / E92 / E93 / S65 | M10 | Replace screws | 60 Nm |
| 4AZ Shock absorber to camber arm | E90 / E92 / E93 / S65 | M12 | tighten in normal position | 100 Nm |