33 21 Output Shaft
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
OUTPUT SHAFT - TIGHTENING TORQUE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Output shaft to rear differential drive flange (Torx screw with ribbed teeth ) |
E81, E82, E87, E90, E91, E92, E93 | M8 | Replace screws | 52 Nm |
| - | E81, E82, E87, E88, E90, E91, E92, E93 | M10 ZNS3 | Replace screws | 70 Nm |
| - | E87 | M10 ZNS | Replace screws | 80 Nm |
| - | E90 / S65, E92 / S65, E93 / S65 | M12 | Replace screws | 120 Nm |