33 17 Rear axle differential mountings
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
REAR AXLE DIFFERENTIAL MOUNTINGS - TIGHTENING TORQUE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Rear differential (if nec. with bracket for vibration damper) to rear axle carrier | E81, E82, E87, E88, E90, E91, E92, E93 | M12 (front) | Observe repair instruction. | 100 Nm |
| - | E81, E82, E87, E88, E90, E91, E92, E93 | M14 (rear) | Observe repair instruction. Replace nut |
165 Nm |
| 2AZ Vibration damper to bolt connection, rear differential | E81, E82, E87, E88, E90 / Except S65, E91, E92 / Except S65, E93 | M12 | - | 68 Nm |
| 3AZ Vibration damper on bracket | E81, E82, E87, E88, E90 / Except S65, E91, E92 / Except S65, E93 | M12 | - | 68 Nm |