LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1014 (Rear Axle - Tightening Torques) >> Axle Mounting >> 33 33 Rear Axle Suspension

33 33 Rear Axle Suspension

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
REAR AXLE SUSPENSION - TIGHTENING TORQUE

- Type Thread Tightening specification Measure
1AZ Rear axle carrier with rubber mounts to body E81, E82, E87, E88, E90, E91, E92, E93 M12   100 Nm
2AZ Compression strut on body E81, E82, E87, E88, E90, E91, E92, E93 M10 Replace screws -
- - - Jointing torque 47 Nm
- - - Torque angle 90 °
3AZ Vibration damper to rear axle carrier E93 M10 - 56 Nm
- E93 M8 - 27 Nm