31 35 Stabilizer Bar
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
STABILIZER BAR - TIGHTENING TORQUE
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Retaining bar for stabilizer to front axle carrier | E81, E82, E87, E88, E90 / REAR END, E91 / REAR END, E92 / REAR END, E93 | M8 | Replace nuts | 21 Nm |
| E90 / Four Wheel Drive, E91 / Four Wheel Drive, E92 / Four Wheel Drive | M10 | Replace nuts | 60 Nm | |
| E84 / Allrad | M10 | Replace screws | 56 Nm | |
| 2AZ Stabilizer link to stabilizer / spring strut shock absorber | E81, E82, E87, E88, E90, E91, E92, E93 | M10 | Replace nut | 58 Nm |
| E84 | M10 | Replace nut | 56 Nm | |