31 10 Front Axle Suspension
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
FRONT AXLE SUSPENSION - TIGHTENING TORQUE
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Front axle carrier to engine carrier | E81 / E82 / E87 / E88 / E90 / E91 / E92 / E93, S65 | M12 | 108 Nm | |
| E92 / S65, E93 / S65, E90 / S65 | M10 x 42 | Jointing torque | 56 Nm | |
| Torque angle | 90° | |||
| 2AZ Reinforcement strut to front axle carrier / body | E90 / E91 / E92 / E93 / Heck | M10 | Replace screws & insertion nuts | |
| Jointing torque | 56 Nm | |||
| Torque angle | 90° | |||
| 3AZ Reinforcement plate to front axle carrier | E90 / Four Wheel Drive, E91 / Four Wheel Drive, E92 / Four Wheel Drive, E92 / S65, E93 / S65, E90 / S65 | M10 | Replace screws | |
| Jointing torque | 56 Nm | |||
| Torque angle | 90° | |||
| 4AZ Support angle for engine mount to front axle carrier | M57T2 | M8 | 19 Nm | |
| 5AZ Reinforcement plate for engine mount to front axle carrier | M57T2 | M8 | 19 Nm | |
| 6AZ Heat shield to front axle carrier | E81, E82, E87, E88, E90, E91, E92, E93 | M6 | 4.5 Nm | |
| E84 / Allrad, E90 / Allrad, E91 / Allrad, E92 / Allrad | self-tapping screw | 4 Nm | ||
| 7AZ Lower pedestrian protection to front axle carrier | E84 | 25 Nm |