24 13 Transmission Extension, Bearings, Seals
WARNING: This page is about a different car, the 2010 BMW 128i, 2009 BMW 128i, and 2008 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION EXTENSION, BEARINGS, SEALS - TIGHTENING TORQUE
| Application | Type | Thread | Description | Tightening specification |
|---|---|---|---|---|
| 1AZ Slotted nut/output flange | A5S 310Z / A5S 440Z / A5S 560Z / A5S 325Z | 120 Nm | ||
| 2AZ Double hexagon nut/output flange | GA6HP26Z | until 09/02 without sealing ring in output flange |
80 Nm | |
| GA6HP19Z / GA6HP26Z | from 09/02 with sealing ring in output flange |
60 Nm | ||
| 3AZ Output shaft nut to output flange | GA6L45R | 22x1.5 | 55 Nm |