21 21 Clutch Disc And Drive Plate
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
CLUTCH DISC AND DRIVE PLATE - TIGHTENING TORQUE
| Application | Type | Thread | Work instruction | Measure |
|---|---|---|---|---|
| 1AZ Clutch to flywheel | E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 8.8 | Replace screws | 25 Nm |
| E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 10.9 | Replace screws | 34 Nm | |
| Clutch to flywheel With ZNS bolts | Replace ZNS bolts Jointing torque and angle of rotation must be observed without fail | |||
| S85 / S65 | Jointing torque | 15 Nm | ||
| Torque angle | 25 ° | |||
| N52, N53, N52K M47T2, N45T, N54, N46T, N43, N45K, N47, M57T2, N47S, N62TU | M8 10.9 | Jointing torque | 15 Nm | |
| Torque angle | 90° ± 5° |