17 11 Radiator and Mounting Parts
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
RADIATOR AND MOUNTING PARTS - TIGHTENING TORQUE
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Radiator to body | ||||
| self-tapping screw | All | B6.3 | 9 Nm | |
| All | M6 | 10 Nm | ||
| 2AZ Drain plug to radiator | All | 2.5 Nm | ||
| 3AZ Temperature switch to radiator (91°C / 99°C) max. | All | 15 Nm | ||
| 4AZ Expansion tank to body | All | 9 Nm | ||
| M57TU / E65 | 4 Nm | |||
| 5AZ Radiator on module carrier | E46 | 4 + 1 Nm | ||
| 6AZ Retaining plate, expansion tank, to radiator | E46 | 4 + 1 Nm | ||
| 7AZ Fan cowl on radiator | E46 | 4 + 1 Nm | ||
| 8AZ Plug in radiator (temperature switch omitted) | E36/7 / M54 | M14 x 1.5 | 15 Nm | |
| 9AZ Mounting plate to radiator | M57TU / E65 | 4.5 Nm | ||
| 10AZ Radiator bracket | All | 2.5 Nm |