12 41 Starter Motor With Mounting
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
STARTER MOTOR WITH MOUNTING - TIGHTENING TORQUE TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Starter motor mounting to crankcase | N52, N52K, N51, N53 | M10x85 | Replace screw | - |
| - | - | - | Jointing torque | 20 Nm |
| - | - | - | Torque angle | 180° |
| 2AZ Starter motor mounting to crankcase | N52, N52K, N51, N53 | M10x30 | Replace screw | - |
| - | - | - | Jointing torque | 20 Nm |
| - | - | - | Torque angle | 90° |
| 3AZ Battery positive lead to starter | N52, N52K, N51, N53 | M8 | - | 13 Nm |