12 52 Plug Connections, Terminals, Loose Parts
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
PLUG CONNECTIONS, TERMINALS, LOOSE PARTS - TIGHTENING TORQUE TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Holder, wiring harness, to cylinder head | N52, N54 | M6x12 | - | 8 Nm |
| 2AZ Cable duct to cylinder head cover | N52, N54, N53 | M6 | Replace screws | - |
| - | - | - | Jointing torque | 3 Nm |
| - | - | - | Torque angle | 45° |
| 3AZ Ground cable to crankcase (electr. coolant pump) | N52, N54, N52K, N51, N53 | M8 | Replace screws | - |
| - | - | - | Jointing torque | 8 Nm |
| - | - | - | Torque angle | 45° |
| 4AZ Assembly: holder, monitor sensors | N54 | M6x12 | - | 8 Nm |