12 62 Coolant Temperature
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
COOLANT TEMPERATURE - TIGHTENING TORQUE TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Temperature sensor to water flange (glow time/coolant temperature gauge) | M21 | - | - | 18 Nm |
| - | M51 | - | - | 13 Nm |
| 2AZ Temperature switch (5.5°C/17°C) to fuel filter/cylinder head | M21 | - | - | 18 Nm |
| 3AZ Coolant temperature sensor (2-pin plug-in connection) | S38/S50 | - | - | 13 Nm |
| - | S85 | M12/1.52 | - | 13.5 Nm |
| - | All others | - | - | 20 Nm |
| 4AZ Remote thermometer sensor (2- pin plug-in connection) | All | - | - | 20 Nm |
| Remote thermometer sensor (4-pin plug-in connection) | M62 | - | - | 16 Nm |
| - | S62 | M12 x 1.5 | - | 14 Nm |
| 5AZ Remote thermometer sensor on coolant flange | S50 | - | - | 18 Nm |
| 6AZ Temperature sensor - air | S38/S50 | - | - | 13 Nm |
| 7AZ Temperature sensor - oil | S38/S50 | - | - | 13 Nm |