12 90 Control Unit Housing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
CONTROL UNIT HOUSING - TIGHTENING TORQUE TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Assembly of upper and lower sections | E32/E34/E36 | - | - | 5 Nm |
| 2AZ Center section to body | E32/E34 | - | - | 3 Nm |
| 3AZ Control unit holder in E box | E36 | - | - | 5 Nm |
| 4AZ Control unit box cover | E38/E39/E52 | - | - | 4 Nm |
| - | E46 | - | - | 6 Nm |
| - | E53/E36/7/E54 | - | - | 3 Nm |
| 5AZ Electronics box to firewall | E65 | Plastic screw | - | 6 Nm |