11 23 Vibration Damper
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
VIBRATION DAMPER - TIGHTENING TORQUE
| Type | Thread | Description | Tightening Specification | |
|---|---|---|---|---|
| 3AZ Belt pulley / vibration damper to hub | S38 / B36 | M8 10.9 | 34 Nm | |
| N40 / N42 / N45 / N46 / S38 / B38 | M8 10.9 | 34 Nm | ||
| All / others | M8 | 22 Nm | ||
| 4AZ Belt pulley to vibration damper | S38 / B35 | M8 8.8 | 22 Nm | |
| S50 | M8 8.8 | 22 Nm | ||
| 5AZ Sprocket with hub or hub to crankshaft | M40 | M16 x 1.5 | Replace screw | 310 Nm |
| M42 / M43 / M43TU / M44 | M16 x 1.5 | Replace screw | 330 Nm | |
| 6AZ Hub to crankshaft | N40 / N42 / N45 / N46 | M16 x 1.5 | Replace screw | 300 Nm |