11 61 Air Intake Manifold
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
AIR INTAKE MANIFOLD - TIGHTENING TORQUE
| Type | Thread | Tightening Specification | |
|---|---|---|---|
| 1AZ Hexagon screw (4 x) Air intake manifold to cylinder head. |
N52K | M7 x 50 | 15 Nm |
| 2AZ Hexagon nut (3 x) Air intake manifold to cylinder head. |
N52K | AM7 (to DIN 439) | 15 Nm |
| 3AZ Hose clamp (1 x) Clean-air gaiter to connection, throttle valve assembly. |
N52K | L80-100 | 3 Nm |
| 4AZ Ejot screw (1 x) Fuel line to intake manifold |
N52K | 50 x 20 | 6 Nm |
| 5AZ Oval-head screw (2 x) Holder, engine wiring harness, to intake manifold. |
N52K | M6 x 10 | 8 Nm |