12 52 Plug Connections, Terminals, Loose Parts
PLUG CONNECTIONS, TERMINALS, LOOSE PARTS - TORQUES SPECIFICATION TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Holder, wiring harness, to cylinder head | N52, N54 | M6x12 | - | 8 Nm |
| 2AZ Cable duct to cylinder head cover | N52, N54, N53 | M6 | Replace screws | - |
| - | - | - | Jointing torque | 3 Nm |
| - | - | - | Torque angle | 45° |
| 3AZ Ground cable to crankcase (electr. coolant pump) | N52, N54, N52K, N51, N53 | M8 | Replace screws | - |
| - | - | Jointing torque | 8 Nm | |
| - | - | - | Torque angle | 45° |
| 4AZ Assembly: holder, monitor sensors | N54 | M6x12 | 8 Nm |