13 71 Air Intake Silencer
AIR INTAKE SILENCER - TORQUES SPECIFICATION
| Type | Thread | Description | Tightening Specification | |
|---|---|---|---|---|
| 1AZ Air duct, compressor 1, to intake muffler | N54 | Hose clamp | 3 Nm | |
| 2AZ Air duct, compressor 2, to intake muffler | N54 | Hose clamp | 3 Nm | |
| 3AZ Air duct, compressor 1&2, to crankcase/cylinder head | N54 | M6 x 25 | 9 Nm | |
| 4AZ Charge-air duct to bracket | N54 | M6 x 20 | 9 Nm | |
| 5AZ Intake duct to front wall | N54 | Self-tapping screw | 2 Nm | |
| 6AZ Charge-air duct Intercooler before throttle valve assembly to charge-air duct Intercooler to throttle valve assembly | N54 | Screw hose clamp with tensioning spring | 4.5 Nm | |
| 7AZ Raw air snorkel/Pit sensor to charge-air duct | N54 | Oval-head screw for plastic | 2 Nm | |
| 8AZ Bracket, air duct, compressor 2, to cylinder head | N54 | M6 x 15 | 9 Nm | |
| 9AZ Charge-air duct to compressor outlet | N54 | V-band clamp | 3.5 Nm | |
| 10AZ Charge-air duct, intercooler, to throttle-valve assembly | N54 | M6x20 | 9 Nm | |
| 11AZ Air duct, compressor 1&2, to engine block | N54 | M6x25 | 9 Nm | |
| 12AZ Clean air Y-pipe to intake muffler | N54 | L89-96 | Clamp | 3 Nm |
| 13AZ Clean air duct to clean air Y-pipe | N54 | L53-60 | Clamp | 3 Nm |
| 14AZ Clean air duct to EPPC bracket | N54 | K50x30 | 3.5 Nm | |
| 15AZ Charge-air duct, cold (vehicle-fixed to engine-fixed) | N54 | L65-72 | Clamp | 3 Nm |
| 16AZ Rubber mount to electric fan cowl | N54 | K60x45 | 5 Nm | |
| 17AZ Raw air diversion to lock support | N54 | K50x20 | 6 Nm | |
| 18AZ Clean air duct to compressor 2 | N54 | M6 | 8 Nm |