LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Cooling System - Tightening Torques >> Coolant CHECHKING >> 17 00 Coolant

17 00 Coolant

COOLANT SPECIFICATIONS

  Type Thread Tightening specification Measure
1AZ Hose clamps to coolant hoses 32 ... 48 mm dia. All     2.5 Nm
2AZ Bleed screw (WAF 8) to thermostat housing All, without E46     8 Nm
Plastic bleed screws to coolant lines E46     2 -0.5/+1 Nm
3AZ Level switch (WAF 30) to coolant expansion tank All     3 Nm
4AZ Bleed screw to water valve or auxiliary water pump E90/E91     3.5 Nm