51 61 011 Removing And Installing/Replacing V-Strut, Front Axle Carrier, Left Or Right
IMPORTANT:
Observe safety instructions for raising the vehicle. See 00...... LIFTING VEHICLE WITH A LIFTING PLATFORM .
Driving without V-struts is not permitted!
Necessary preliminary tasks:
- Remove front underbody protection
Release screws (1, 2, 3).
Remove V-strut (4) towards front.
Installation:
Replace screws.
Make sure screws are installed in correct positions.
- Screw (1) M12x30
- Screw (2) M10x33
- Screw (3) M12x35
Tightening torque, see 51 71 10AZ in 51 71 SEALS AND LOOSE BODY PARTS .