Special Tools Required

• 00 9 317 TRIM PANEL WEDGE

Necessary preliminary tasks: 

• Pull off mucket from front door in covered area

Unclip cover (1) with special tool 00 9 317  in direction of arrow from instrument panel trim.

If necessary unfasten plug connection.

Installation: 

Make sure sealing lip (2) is correctly seated in dashed area.

Fig 1: Uncliping Cover Using Special Tool 00 9 317

Courtesy of BMW OF NORTH AMERICA, INC.

Retaining clips (1) of cover (2) must not be damaged.

Fig 2: Identifying Clips On Cover

Courtesy of BMW OF NORTH AMERICA, INC.