General Notes
- Use only the BMW-approved anti-friction agent for fitting
- Application only at room and object temperatures between 18 and 25°C
- Anti-friction agent dries at different rates depending on the quantity, temperature and ventilation and becomes sticky
- Anti-friction agent can only be used for fitting and not for fault elimination (e.g. grating)
- Newly painted parts may only be brought into contact with the anti-friction agent after cooling
- Optimal bonding/attachment to the background surface is achieved after approx. 48 hours. The window guide seal must not be exposed to mechanical strain beforehand (car wash, strength test, etc.).
IMPORTANT:
To avoid grating noises, do not use soapy water (low-surface-tension water with washing-up liquid) or anti-friction agent containing silicone